2011 Honda Fit HYBRID RACING HEAVY-DUTY HONDA TRANSMISSION DETENT SPRINGS (07-13 FIT & 10-16 CR-Z)

• • More than 30% stiffer spring rate than stock.
  • Stronger springs offer direct gear engagement
  • Yellow Zinc Chromate plated for durability
  • Suitable for all cars (street and race)

  Our heavy-duty transmission detent springs offer an increase in the preload and 30% stiffer spring rate over the factory parts which aids the transmission gear selector fork. Upgrading these springs will make your gear engagements a bit sharper since they replace the soft OEM ones.

  Our Heavy-Duty Gear Selector Springs offer an upgrade in the side-side movement of the shifter, these detent springs offer a forward-back upgrade. An immediate change in feel will be noticed once installed. Replace the worn-out detent springs and add new life to your gear changes.

  Depending on the application, these springs are more than 30% stiffer than the stock Honda hardware. Please use the installation instructions as a general guide for the Honda L-Series transmission.

  Be sure to torque the Honda K-Series transmission detent bolts to 16 lbf-ft (22 N-m / 2.2 kgf-m). You will use all three springs. NOTE - Only the CRZ and Honda Fit RS 6spd will use all three springs. The Honda Fit / Jazz 5spd uses 2 springs. 

  Estimated ship date Monday, 23rd May

HYBRID RACING HEAVY-DUTY HONDA TRANSMISSION DETENT SPRINGS (07-13 FIT & 10-16 CR-Z) fits the following vehicle(s):

• Part Number fits: HYB-DTS-01-01 (120971)
• 2007 Honda Fit
• 2008 Honda Fit
• 2009 Honda Fit
• 2010 Honda Fit
• 2011 Honda Fit
• 2012 Honda Fit
• 2013 Honda Fit